Universal Bluetooth Clock Radio With Charging for All Smartphones USER MANUAL JBD-100A PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
DEAR JENSEN® CUSTOMER Selecting fine audio equipment such as the unit you've just purchased is only the start of your musical enjoyment. Now it's time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association's Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
11. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as ac adaptor is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped. 12. This appliance shall not be exposed to dripping or splashing water and that no object filled with liquids such as vases shall be placed on the apparatus. 13.
LOCATION OF CONTROLS TOP SIDE 1 6 2 7 3 8 4 9 5 FRONT SIDE 10 1. Alarm 1 2. 3. 4. 5. 11 Button Alarm 2 Button Access Opening for Top Compartment Time Set/ Memory/ Display Button Sleep Button Snooze/ Dimmer/ Phone Button 6. Play/ Pause / Memory / Pairing Button 7. Skip Forward / Tuning Up Button Skip Backward / Tuning Down Button 8. Volume + (Up) Button Volume - (Down) Button 9. Power On/ Standby 10.Speaker 11.
REAR SIDE 13 14 15 16 12 17 12. 13. 14. 15. 16. 17. USB Charging Port DC IN Jack AUX IN Jack Reset Button Battery Compartment (bottom of unit) FM Wire Antenna GETTING STARTED Clock Back-up Battery Installation 1. Remove the battery compartment cover. 2. Install 2 “AAA” (UM-4) batteries (not included) in the battery compartment following the polarity markings shown on it. 3. Replace the battery compartment cover.
- Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel- cadmium) batteries. - Only batteries of the same or equivalent type as recommend are to be used. - If the unit is not to be used for an extended period of time, remove the batteries. Any old or leaking battery can cause damage to the unit and may void the warranty. - Do not dispose of batteries in fire, battery may explode or leak.
ALARM SETTING 1. Tap the Alarm 1 or Alarm 2 Button once to check the alarm time and , Beeping Alarm, Bluetooth wake up option (Radio 2. In standby mode, press and hold the or ). button for 3 seconds when the alarm time is showing. The hour digits will blink. 3. Tap the or button to adjust the hour. Press and hold the button for fast advance / reverse setting. 4. Press the or button to confirm the hour setting, the minute digits will flash to prompt for input. 5.
Wake to Beeping Alarm 1. The Beeping Alarm will automatically turn on when the alarm time is reached. The respective or indicator will blink. 2. The sound starts softly and gradually becomes louder and louder until its maximum level is reached. 3. The beep alarm will sound for 60 minutes and then turn off automatically if the snooze button is not pressed. 4. To stop the beep alarm sound immediately, tap the respective alarm button.
HINTS FOR BEST RECEPTION: The receiver has a build-in FM wire antenna hanging from the back cabinet. This wire should be totally unwrapped and fully extended for the best reception. NOTE: Automatic tuning depends on the signal strength of the broadcasting station, so weak stations may be skipped. You can manually tune to find the weak stations if a station gets skipped.
2. Turn on the unit and tap the Source Button to select Bluetooth mode, Bluetooth 3. 4. 5. 6. 7. icon will be flashing slowly on display. The unit is searching the last paired device. Once it is found, the icon will light steadily. After successfully pairing (linking), you can begin playing music from your Bluetooth enabled device wirelessly to the speaker. Press the Volume +/ Volume - Button on the speaker to adjust to the desired volume level.
CHARGING YOUR SMART PHONE OR PORTABLE DEVICE This unit features a USB port for charging your portable device (iPod, iPhone, Android phone, etc.) when used with the USB charging cord that came with your device. 1. Plug one end of the USB cable (not included) into the USB Charging Port located on the back of the unit. Plug the other end of the cord into the device you wish to charge. 2. Observe the battery charge indicator on your device to make sure the charging process starts normally. 3.
SLEEP TIMER OPERATIONS 1. In Radio, Bluetooth or AUX mode, when you press the Sleep Button once, the “SLEEP” indicator will appear on the LCD display. 2. Tap the Sleep Button repeatedly to select the desired sleep time. The sleep timer can be chosen from 10 - 120 minutes in 10 minute step. After sleep timer has been selected, wait for 5 seconds to confirm. The “SLEEP” indicator remains on the LCD. The unit will stop and go into Standby mode automatically when the selected sleep time has expired. 3.
RESETTING THE UNIT If the unit experiences a power surge or electric shock, it is possible that the internal micro-controller may lock up and the unit will not respond to any commands from the panel controls. In this event, use a straightened paper clip, toothpick or similar objects to press the RESET button located at rear of the unit (see the below figure). The reset operation clears the system memory and all of your previous settings will be erased.
TROUBLESHOOTING GUIDE Symptom The unit does not respond (no power) No Sound Cell phone will not charge Noise or sound distorted on FM broadcast Sound is distorted Possible Problem Solution The unit is disconnected from Reconnect to the AC outlet. the AC outlet. The AC outlet has not power. Try the unit on another outlet. Go through “LISTENING TO The unit is not linked with BLUETOOTH ENABLED DEVICE” Bluetooth enabled device. process to link the unit.
SPECIFICATIONS Power requirement: AC-DC adaptor: Main Unit: Backup Battery for Clock: Input: AC 120V ~ 60Hz DC input: DC 5V 1500mA 2 x AAA (UM-4) Batteries (not included) Frequency Range Radio Band: FM 87.5 ~ 108 MHz At Spectra, environmental and social responsibility is a core value of our business. We are dedicated to continuous implementation of responsible initiatives with an aim to conserve and maintain the environment through responsible recycling. Please visit us at http://www.spectraintl.
90 DAY LIMITED WARRANTY AND SERVICE VALID IN THE U.S.A. ONLY SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from defective materials or factory workmanship for a period of 90 days from the date of original customer purchase and provided the product is utilized within the U.S.A. This warranty is not assignable or transferable.
