User's Manual Part 3

Connecting Bluetooth to Your Smartphone

Slide the SOURCE selector to BT/LINE IN position to connect your external

Bluetooth device and the display will show bt and flash.

2. Set the Bluetooth function of your external device to ON and begin searching

for devices.

Note: The effective distance between your external device and this apparatus is

10 meters (30 feet).

3. Once “ karaoke ” appears on the paired device list of your external device, select it.

Notes: If cannot connect, press PAIR button to reconnect again.

4. If you are asked for a password, enter “0000”

5. When both devices are successfully connected an audible chime will sound and

the display will show bt and stop flash, now you are ready to play music wirelessly

from your device.

Press the PLAY button of the unit or external Bluetooth device to start music playback.

7. Press the NEXT / PREV of the unit or external Bluetooth device to switch

between music tracks.

Note: After initial pairing, the unit will stay paired unless unpaired manually by the

user or erased due to a reset of the device. If your device should become unpaired

or your find it is unable to connect, repeat the above steps or press & hold the PAIR

button again.

Using Microphone

Requires a microphone (included) .

1. Plug the microphone (see below figure) into the MIC 1 INPUT or MIC 2

INPUT.

2. Slide the ON /OFF switch of

MICROPHONE

3. Use the

MIC

VOLUME

dial to adjust the volume of audio sound from the

microphone.