User's Manual

8
TROUBESHOOTING
If you have followed the instructions and are having difficulty operating the unit, locate the
PROBLEM in the left column below. Check the corresponding POSSIBLE CAUSE AND
SOLUTION column to locate and fix the problem.
SPECIFICATIONS
Specifications are typical, individual units might vary. They are subject to continuous
improvement without notice and without incurring any obligation.
PROBLEM POSSIBLE CAUSE AND SOLUTION
Bluetooth cannot connect to
BB10K
Make sure no other device from your friend or family is
connected to BB10K. When BB10K Bluetooth is
connected, press BLUETOOTH button would stay ON. So
make sure BB10K indicating Bluetooth is ready to
connect. Also make sure your smartphone / tablet is
located close to BB10K less than 2 meters when pairing.
Hold the BLUETOOTH button to reconnect again.
Intermittent Bluetooth music
streaming
The wireless Bluetooth distance of BB10K is about 7-l0
meter in open area. Below conditions could block you
Bluetooth signal and please ensure you would get rid of
those:
Metal protection on case for your phone/tablet
Metal or wall is blocking in between your phone / tablet
and BB10K
Another Bluetooth device is working close toBB10K
No sound on selected
source
Ensure that the BB10K is powered ON
Check the ext. device volume.
Check the volume level on paired Bluetooth device
Battery power low / connection USB cable and charging
power again.
DC IN Power
DC 5V , 800mA ( for battery charging)
Built-In Battery
3.7V , 1000 mAh
SOUND SOURCE INPUT
Bluetooth, Mic in, Aux in,
Total Harmonic Distortion
Below 10% at Standard Output
Signal to Noise Ratio
Over 41dB
Master Power Output
1.8W RMS