User's Manual
Table Of Contents
- Bluetooth Portable CD Radio
- MPC5050
- MET36E
- MPC 5050
- MPC-5050
- Operation Guide
- Warnings and Precautions
- Location of the Controls
- Location of the Controls
- Power On the Unit
- Adjusting the Volume
- Adjusting the Rod Antenna
- Using Headphones
- Battery Operation
- AC Operation
- Use adapter 6V , 1.200mA (include).
- Connect the small end of adapter cable into the DC jack at the rear of the unit. Insert the adapter plug into a conveniently-located AC outlet. Please ensure that your mains supply is compatible before use.
- Getting Started / Main Operation
- DC Batteries / AC Power Operation
- Using the Radio
- Manual Tuning of Radio
- Storage the Radio Presets
- You can preset up to 20 stations for easy access as follows:
- Recall a Preset Station
- You can recall stored stations for easy access as follows:
- Listening the Radio
- Insert a CDs disc.
- Playing a CDs Disc
Insert a CDs disc.
1. Open the CD door by pressing CD OPEN button.
2. Insert a disc into the disc compartment with the title side upwards.
3. Close the CD compartment door, “- - -” is displayed for few seconds, and
the total number of title will show on display and disc will auto start play.
Remove a CDs disc.
Press the STOP / M+ button once, open the CD door by pressing CD OPEN
button. Remove the CDs disc when it has stopped spinning.
Playing a CDs Disc
1. After power connect, press the POWER button to turn on your unit.
2. If necessary, press the SOURCE button to select CD mode.
3. After insert disc “- - -” will displayed for few seconds, and the total track /
file number show on display.
4. Press the PLAY / PAUSE / PAIR button to play the discs.
5. Press / TUNE+ or / TUNE– button to jump to next / previous
track playing.
6. Press and hold the / TUNE+ or / TUNE– button to skip to fast
forward/fast backward playing.
7. Press the PLAY / PAUSE / PAIR button to pause the discs playing. Press
again to resume.
8. Press the STOP / M+ button to stop the discs playing.
9. After all tracks have been played, the discs player will stop automatically.
Programming Disc
You can preset up to 20 program track for easy access as follows:
1. When CD playing, press the STOP / M+ button to CD stop mode.
2. Press the MEM / PROG button once, and “PROG & P01” will blink on
LCD display.
3. Press the / TUNE+ or / TUNE– button until the display shows
the track number required.
4. Press the PROG button to store the selection.
5. Repeat the 3-4 steps until you have entered all the tracks.
6. To play the stored sequence, press the PLAY / PAUSE / PAIR button.
7. To cancel program, press the STOP / M+ button twice.
8. After all memory tracks have been played, the player will stop
automatically.
Using Repeat Function
1. Press the REPEAT button once to repeat current track playing.
2. Press the REPEAT button twice to repeat all tracks playing.
3. To cancel the repeat function: press the REPEAT button until “1 or ALL”
icons disappear or press the STOP / M+ button twice.
Listening CDs Disc
7