User's Manual
Table Of Contents
- Bluetooth Portable CD Radio
- MPC5050
- MET36E
- MPC 5050
- MPC-5050
- Operation Guide
- Warnings and Precautions
- Location of the Controls
- Location of the Controls
- Power On the Unit
- Adjusting the Volume
- Adjusting the Rod Antenna
- Using Headphones
- Battery Operation
- AC Operation
- Use adapter 6V , 1.200mA (include).
- Connect the small end of adapter cable into the DC jack at the rear of the unit. Insert the adapter plug into a conveniently-located AC outlet. Please ensure that your mains supply is compatible before use.
- Getting Started / Main Operation
- DC Batteries / AC Power Operation
- Using the Radio
- Manual Tuning of Radio
- Storage the Radio Presets
- You can preset up to 20 stations for easy access as follows:
- Recall a Preset Station
- You can recall stored stations for easy access as follows:
- Listening the Radio
- Insert a CDs disc.
- Playing a CDs Disc
recemanually
Using the Radio
1. After power connect, press the POWER button to turn on your unit.
2. If necessary, press the SOURCE button to select FM mode.
3. The LCD DISPLAY will show the frequency of radio.
4. Press or hold the / TUNE+ or / TUNE – button to scan correct
radio frequency.
Automatic Tuning of Radio
1. In FM mode, hold / TUNE+ or / TUNE– button to automatically
search for the next available station.
2. If the reception is poor, use the Manual Tuning to fine-tune the station. If
the reception does not improve, try altering the position / length of the
aerial. If the reception is still poor, scan again to determine whether a
stronger signal exists for the desired frequency.
Manual Tuning of Radio
1. In FM mode, press the / TUNE+ or / TUNE – to manually scan
through the frequency band.
2. If the reception does not improve, try altering the position / length of the
aerial. If the reception is still poor, scan again to determine whether a
stronger signal exists for the desired frequency.
Storage the Radio Presets
You can preset up to 20 stations for easy access as follows:
1. Tune to the station you wish to preset (see Using the Radio).
2. Press the MEM / PROG button, the preset station number ( P01-P20) will
show on LCD display.
3. Use the STOP / M+ button to select the preset position.
4. Press the MEM / PROG button again to save the current station into the
specified preset.
5. Repeat 1 – 4 step to storage more radio presets.
Recall a Preset Station
You can recall stored stations for easy access as follows:
1. Press the STOP / M+ button search preset station. The unit will be
sounding after select.
Listening the Radio
6