Installation Guide

HID® BEEKS001 Install Guide PLT-05252, Rev. A.1
INSTALLATION GUIDE
hidglobal.com
An ASSA ABLOY Group brand
1 Initial setup
For more detailed information, visit https://hid.gl/HID-BEEKs-installation
1. Account setup
1. Visit bluzone.io and register a new account.
Verify your email by clicking on the link
emailed to you.
2. Project setup
1. Use the dropdown menu in the top right
portion of the screen to create a new
project.
2. Go to Settings and send a Product
Activation request for your use case e.g.
RTLS, Status Monitoring or Advanced
Condition Monitoring, depending on the
SaaS model you have purchased. Your
product features will be activated within
24 hours.
Assign the beacon a name that coincides with
the asset on which it is installed. It is also good
practice to use a label-maker to place a label
on the beacon that matches this name.
3. Bluzone mobile app setup
1. Download the Bluzone mobile app from
Google Play or the iOS App Store.
2. Login to your account with Bluzone
credentials.
4. BluFi provisioning
1. Plug BluFi into power source for initial
setup.
2. In Bluzone app, tap Provision > BluFi
3. Hold mobile device close to BluFi and select
device with highest signal strength (swipe
down to refresh list).
4. Follow each step within Bluzone app as
instructed to define location and picture of
the installation place (optional).
5. When prompted for Template, create a
new Template with your WiFi SSID and
password.
5. BEEK provisioning
1. Place BEEK close to BluFi (don’t install on
assets yet).
2. For each beacon, hold mobile phone close
to BEEK and select device with highest
signal strength (swipe down to refresh list).
Continue the steps for each BEEK.
3. When prompted for a Template, select the
template corresponding to your use case
e.g. “Default Beacon Template - Condition
Monitoring AI” for Advanced Condition
Monitoring with BEEKS001-CM.