User manual

"Boat mode": Boat mode

"Brake mixing": Brake mixer

"Mixes": Channel mixer

"Display servos": Display for position of all servo levers

"Race timer": Timer

"Keys function": Assignment of functions for trim buttons

"Models" Model management

"RX setup" Settings for the receiver

"System": Settings for the transmitter

b) “Reverse” function

This function can be used to change the servo rotation direction

of all four channels (CH1 to CH4) as required. Depending on

the installation position and the steering in the model, it may be

necessary to change the direction of rotation of a servo.

For this, tap the switch to change the servo rotation direction

of the required channel from Normal (NOR) to Reverse (REV).

Figure 12