User manual

66
15. Main menu settings
a) Main menu settings
Switch the transmitter on and select the main menu. The following setting options are available for use:
To get to the display shown
at the right of fi gure 11,
scroll the display to the side
as usual on mobile phones.
"Reverse": Reverse switching
"End points": End point setting for the servo path
"Subtrim": Middle position setting for the drive and steering servos
"Steering exponential": Exponential setting for the steering servo
"Steering speed": Speed setting for the steering servo
"Steering mix": Setting for steering types
"Throttle neutral": Calibrate the neutral setting for the accelerator/brake servo
"Throttle exponential": Exponential setting for the accelerator/brake servo
"Throttle curve": Setting for accelerator/brake curve
"A.B.S.": ABS brake
"Throttle speed": Speed setting for the accelerator/brake servo
"Throttle middle": Middle position setting for the accelerator/brake servo
"Throttle idle up": Adjustment of the neutral position for the accelerator/brake servo
"Engine cut": Defi nition of a given position for the accelerator/brake servo
Figure 11