Datasheet

BEVEL GEARBOX. PART NO. 919D24
BEVEL GEARBOX
This unit has steel gears and shafts running in ballraces and scintered bronze bearings, 1 ball race and
sintered bearing per shaft. The former act also as thrust races protecting the bevel gears from external
pressures of varying loads. The housing mouldings are 30% glass filled nylon for strength and have four
pre-drilled mounting holes. Key flats are provided on both shafts.
* 1:1 gear ratio *
* Lubricated for life *
* Designed for rugged service life *
Specification Material
Weight: 42g Case: 30% glass filled nylon
Backlash: 1 deg approx Gear: Mild steel: BS970:part 3:1991:230MO7
Max input speed: 5000 r.p.m.
Rated tolerance torque: 7.5 Kg-cm
Max momentary tolerance torque: 22.5 Kg-cm
IN-LINE COUPLINGS: 5 - 5mm Pt No. 919D1/5
5 - 6mm Pt No. 919D1/3
FELDERLAND LANE. WORTH. DEAL. KENT. CT14 OBT
TEL: [phone]. FAX: [phone]
E-MAIL: [e-mail] www.mfacomodrills.com
THE ABOVE FIGURES ARE A GUIDE ONLY AND DO NOT FORM ANY CONTRACTUAL OBLIGATION ON THE PART OF MFA/COMO DRILLS.