User's Manual

107

If the AP does not support DHCP, you can connect to the AP using 3)

a static IP address

2 Description of each field in the Wi-Fi profile.

Network name: SSID (ID)1)

Security type: WEP, WPA-PSK/2 support. 2)

Security key: saves the security key. 3)

IP/DNS setting: this allows you to set to Automatic or Static 4)

depending on whether the AP supports DHCP.

For Static, enter the field value of the IP address and DNS server to

use with the static IP address when connecting.

3 How to save the Wi-Fi profile

Select Saved networks from the Options menu, then select 1) New

network and enter values into each field.

It is possible to select and save the AP search list by selecting 2) Wi-Fi

On and then Refresh (Searching AP).

After connecting to an AP with this Security type, the profile will be 3)

saved automatically.

3. How to obtain MAC-address

For setting up a connection in some wireless networks with MAC filter

you may need to enter the MAC address of your phone into the router.

1 Touch Wi-Fi from the settings tab, then open the options menu.

2 Select My MAC Address and it will be displayed.