User's Manual

51
02
03
04
05
06
07
08
01
Using the flash
The default flash setting is auto, but there are other options.
1 Select
from the left side of the viewfinder to enter the flash sub-
menu.
2 There are three flash options:
Auto - Your camera will assess the light available for a good picture and
use the flash as necessary.
Always off - The camera will never flash. This is useful if you want to
save battery power.
Always on - The camera will always flash.
3 When you touch the option you want, the flash menu will
automatically close, allowing you to take a picture immediately.
4 The flash status icon in the viewfinder will change, based on the new
flash mode.
Adjusting the exposure
The exposure defines the difference between light and dark areas in an
image. A low contrast image will appear foggy, whereas a high contrast
image will appear much sharper.
1 Touch
.
2 Slide the contrast indicator along the bar towards
for a lower
exposure and hazier image or towards
for a higher exposure and a
sharper image.