User Manual

2
Notification Pager Receiver Functions & Usage
 When the machine detects danger or detects an obstacle, an alert will be displayed on the notification pager receiver (⇒see
"Alert display and its notification timing") and it notifies the operator by emitting an alert and vibrating. It emits an alert and
vibrates for 15 seconds then stops for 5 seconds, which it repeats for 10 minutes. After the error with the machine has been
resolved, the notification pager sounds for 1 second and its display indicates standby.
 During autonomous cleaning, always carry the notification pager receiver on you.
 The range in which the notification pager can communicate with the machine is a direct line up to 300 m(985 ft)(2 floors above
and below).
*Range of communication depends on the environment. Communication may not be possible such as where there are walls
with metal.
 After using the notification pager, charge the pager receiver.