Getting Started Guide

Wireless Connection

If you want to use Wi-Fi to connect to your device, please refer to the following steps.

1. Make sure that the Wi-Fi works normally. Please check the WIFI indicator.

2. Use your normal Wi-Fi application on the client to search for the available wireless network.

NOTE:

Please set the client to obtain an IP address automatically, and the client will get an IP address like

“192.168.0.101”. For the detailed procedure, refer to Configuring Your PC.

3. Select the SSID (Wi-Fi name) of your device, and then click Connect.

NOTE:

Please check the label on your device to get the default SSID.

4. Enter the password and then click OK.

NOTE:

Please c

heck the label on your device to get the default password.

5. Wait until the client device is connected to your device successfully.

Accessing the Internet

Before accessing the Internet, please make sure that the following operations are finished.



Your device is connected to the terminal device via a network cable or Wi-Fi.



The terminal device is set to obtain an IP address automatically.

To access the Internet:

1. Launch the Internet browser and enter http://192.168.0.1 in the address bar. The login page

appears.

2. Input the Username and Password and then click Login.

NOTE:

View the label on your device to get the default username and password.

3. Select Settings > Network Settings > Dial-up Settings and then change the WAN

Connection Mode if necessary. The default mode is Automatic.