Getting Started Guide

4
Indicator State Descri
p
tion
Green Blinking
The device is connected to the 2G/3G network
and data is being transferre
d
.
Green Soli
d
The device is
r
egiste
r
e
d
to the 2G
/
3G network.
SIG
Blue on
Signal level panel. Strength is from weak to
strong.
Off
There is no signal or no (U)SIM card is
inserte
d
.
NOTE:
The phone function needs the network support.
Buttons
Button Description
RESET Press and hold for about 3 seconds to restore factory default configurations.
WLAN Press to turn off/on the Wi-Fi function.
WPS
Press to activate the WPS function.
Installing the (U)SIM card
Hold the (U)SIM card with the cut corner oriented as shown and slip it into the card slot until you
hear a click.
WARNINGS!
• Before installing the (U)SIM card, power off your device and remove the external power adapter.
• Your device does not support micro-SIM and nano-SIM card or any other nonstandard (U)SIM cards. To
avoid device damage, please do not use them or any card holders.
Getting Started With Your Device
Connecting Your Device
Follow the number to connect your device.