MF286R Let’s go Getting started with your device. ZTE CORPORATION NO. 55, Hi-tech Road South, Shenzhen, P.R.
LEGAL INFORMATION Copyright © 2019 ZTE CORPORATION. All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice. Version No. : R1.
Getting to Know Your Device External View NOTE: Please use the original external antenna if necessary. Indicators Indicator POWER WIFI PHONE State Description Blue on Power is on and external power supply is working normally. Off Power is off or external power supply is working abnormally. Blue on Wi-Fi works transmission. Blue Blinking Wi-Fi works normally with data transmission. Off Wi-Fi works abnormally or the Wi-Fi function is disabled. Off The phone is not in use.
Indicator SIG State Description Green Blinking The device is connected to the 2G/3G network and data is being transferred. Green Solid The device is registered to the 2G/3G network. Blue on Signal level panel. Strength is from weak to strong. Off There is no signal or no (U)SIM card is inserted. NOTE: The phone function needs the network support. Buttons Button Description RESET Press and hold for about 3 seconds to restore factory default configurations.
If you want to use the mobile network to connect to the Internet or use your home phone, you need to insert your (U)SIM card first. Starting Your Device CAUTION: Your device must be placed in a well-ventilated environment. Do not cover the device. Slide the on/off switch to start your device. After the device is initialized, make sure the LED indicators are in normal status.
Wireless Connection If you want to use Wi-Fi to connect to your device, please refer to the following steps. 1. Make sure that the Wi-Fi works normally. Please check the WIFI indicator. 2. Use your normal Wi-Fi application on the client to search for the available wireless network. NOTE: Please set the client to obtain an IP address automatically, and the client will get an IP address like “192.168.0.101”. For the detailed procedure, refer to Configuring Your PC. 3.
4. Begin to enjoy your Internet service. Telephone Function Your device supports the telephone function. Before using the telephone function, connect the telephone and insert the (U)SIM card. To make a call: 1. Pick up the handset. 2. Key in the telephone number. 3. Press the # key on the telephone to send the call, or wait 4~8 seconds for the call to be dialed automatically. NOTE: If there is no signal indication, the radio signal is unavailable.
Troubleshooting Voice Related Problems Symptoms Possible Problems/ Solutions There is no dial tone. Please wait for 1~2 minutes after the router is turned on. If signal strength is weak, you have no good RF reception. Change the location of the router. There is a prompt / phone alert / announcement as soon as I lift the phone off the hook. The line is noisy/distorted when I lift the phone off the hook. I hear a rapid engaged tone as soon as I lift the phone off the hook.
Symptoms Possible Problems/ Solutions label on the device. Please check the label on the device to get the default username and password of the Claro 4GMax page. If you changed the password and forgot the new password, you need to restore the device to the factory default settings.
Warning and Notice Safety Precautions Some electronic devices may be susceptible to electromagnetic interference. Locate the router away from TV set, radio and other electronic equipment to avoid electromagnetic interference. The router may interfere with medical devices like hearing aids and pacemakers. Consult a physician or the manufacturer of the medical device before using the router. Please keep yourself at least 20 centimeters away from router.
Limited Warranty This warranty does not apply to defects or errors in the Product caused by: i. Reasonable abrasion. ii. End User’s failure to follow ZTE’s installation, operation or maintenance instructions or procedures. iii. End User’s mishandling, misuse, negligence, or improper installation, disassembly, storage, servicing or operation of the Product. iv. Modifications or repairs not made by ZTE or a ZTE-certified individual. v.
FCC Regulations: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model device is on file with the FCC and can be found under the Display Grant section of www.fcc.
