User`s manual

Simulating with the graphic interface
ModelSim Xilinx User’s Manual ModelSim XE Graphic Interface 7-211
Setting default simulation options
Use the Options > Simulation... menu selection to bring up the Simulation
Options dialog box shown below. Options you may set for the current simulation
include: default radix, default force type, default run length, iteration limit,
warning suppression, and break on assertion specifications. OK accepts the
changes made and closes the dialog box. Apply makes the changes with the dialog
box open so you can test your settings. Cancel closes the dialog box and makes
no changes. The options found on each page are detailed below.
Note: Changes made in the Simulation Options dialog box are the default for the current simulation only.
Options can be saved as the default for future simulations by editing the simulator control variables in the
modelsim.ini file; the variables to edit are noted in the text below. You can use the notepad
(CR-70) to edit the
variables in modelsim.ini if you wish. See also, "Projects and system initialization"
(3-35) for more
information.
Default settings page