User`s manual

Simulating with the graphic interface
7-206 ModelSim XE Graphic Interface ModelSim Xilinx User’s Manual
From Specify a Generic dialog
box you can set the following
options.
• Generic Name (-g <Name=Value>)
The name of the generic parameter.
You can make a selection from the
drop-down menu or type it in as it
appears in the VHDL source (case is
ignored).
• Value
Specifies a value for all generics in the
design with the given name (above)
that have not received explicit values in generic maps (such as top-level
generics and generics that would otherwise receive their default value). Value
is an appropriate value for the declared data type of the generic parameter. No
spaces are allowed in the specification (except within quotes) when specifying
a string value.
• Override Instance - specific Values (-G <Name=Value>)
Select to override generics that received explicit values in generic maps. The
name and value are specified as above. The use of this switch is indicated in the
Override Instance column of the Generics list.
The OK button adds the generic to the Generics listing; Cancel dismisses the
dialog box without changes.
VITAL
• Disable Timing Checks (+notimingchecks)
Disables timing checks generated by VITAL models.
• Use Vital 2.2b SDF Mapping (-vital2.2b)
Selects SDF mapping for VITAL 2.2b (default is Vital95).
• Disable Glitch Generation (-noglitch)
Disables VITAL glitch generation.
TEXTIO files
• STD_INPUT (-std_input <filename>)
Specifies the file to use for the VHDL textio STD_INPUT file. Use the Browse
button to locate a file within your directories.