User`s manual

Wave window
7-180 ModelSim XE Graphic Interface ModelSim Xilinx User’s Manual
The Wave Signal Properties
dialog box includes these options:
• Signal
Indicates the name of the currently
selected signal.
• Label
Allows you to specify a new label (in
the pathname pane) for the selected
item.
• Height
Allows you to specify the height (in
pixels) of the waveform.
• Color
Lets you override the default color of a
waveform by selecting a new color
from the color palette, or by entering an
X-Windows color name.
• Pixels = (value + <offset>) * <scale
factor>
This choice works with analog items
only and allows you to decide on the
scale of the item as it is seen on the display. Value is the value of the signal at a
given time, <offset> is the number of pixels offset from zero. The <scale factor>
reduces (if less than 1) or increases (if greater than 1) the number of pixels
displayed.
• Radix
The explicit choices are Symbolic, Binary, Octal, Decimal, Unsigned,
Hexadecimal, and ASCII. If you select Default the signal’s radix changes
whenever the default is changed using the radix command
(CR-81). Item values
are not translated if you select Symbolic.