User`s manual
Wave window
7-166 ModelSim XE Graphic Interface ModelSim Xilinx User’s Manual
The waveform pane displays the waveforms that correspond to the displayed
signal pathnames. It also displays up to 20 cursors.
The window pane below the pathnames window pane and to the left of the cursor
panes is unused at this time.
All window panes in the Wave window may be resized by clicking and dragging
the bar between any two panes.
Using Dividers
Dividing lines may be placed in the pathname and values window panes by
selecting File > New Divider. Dividers serve as a visual aid to signal debugging,
allowing you to separate signals and waveforms for easier viewing.
Dividing lines can be assigned any name, or no name at all. The default name is
"New Divider." In the illustration below, VHDL signals have been separated from
Verilog signals with at Divider called "Verilog." Notice that the waveforms in the
waveform window pane have been separated by the divider as well.
waveform pane
cursors