User`s manual

Wave window
ModelSim Xilinx User’s Manual ModelSim XE Graphic Interface 7-165
The pathname pane displays signal pathnames. Signals
may be displayed with full pathnames, as shown here, or
with only the leaf element displayed. The selected signal
is highlighted.
The white bar along the left margin indicates the selected
Waveset (see Wave window panes
(7-167)).
A values pane displays the values of the displayed signals. Signal values
may be displayed in analog step, analog interpolated, analog backstep,
literal, logic, and event formats. Each signal may be formatted
individually. The default format is logic.
The radix for each signal may be symbolic, binary, octal, decimal,
unsigned, hexadecimal, ASCII or default. The default radix may be set
by selecting File > Options > Simulation in the Main window (see
"Setting default simulation options"
(7-211)).
The data in this pane is similar to that shown in the Signals window
(7-
144)
, except that the values change dynamically whenever a cursor in the
waveform pane (below) is moved.
pathnames pane
values pane