User`s manual

List window
7-138 ModelSim XE Graphic Interface ModelSim Xilinx User’s Manual
Examining simulation results with the List window
Because you can use the Main window View menu (7-116) to create a second List
window, you can reformat another List window after the simulation run if you
decide a different format would reveal the information you’re after. Compare the
two illustrations.
In the first List window, the HDL items are formatted as symbolic and use an item
change to trigger a line; the field width was changed to accommodate the default
label width. The window divider maintains the time and delta in the left pane;
signals in the right pane may be viewed by scrolling. For the second listing, the
specification for triggering was changed to a 100-ns strobe, and the item radix for
a, b, cin, and sum is now decimal.
The divider bar
separates resolution
and delta from
values; signal values
are listed in symbolic
format; and an item
change triggers a
new line.
Signal values are
listed in decimal
format; a 20ns
strobe triggers a
new line