User`s manual

List window
ModelSim Xilinx User’s Manual ModelSim XE Graphic Interface 7-131
Setting List window display properties
Before you add items to the List window you can set the window’s display
properties. To change when and how a signal is displayed in the List window,
make this selection from the List window menu bar: Prop > Display Props. The
resulting Modify Display Properties dialog box has the following options.
Trigger settings page
The Triggers page
controls the
triggering for the
display of new lines
in the List window.
You can specify
whether an HDL
item trigger or a
strobe trigger is
used to determine
when the List
window displays a
new line. If you
choose Trigger on:
Signals, then you
can choose between
collapsed or
expanded delta
displays. You can
also choose a
combination of
signal or strobe
triggers. To use
gating, Signals or
Strobe or both must
be selected.