Technical data

Debugging a VHDL design
ModelSim EE/SE Tutorial 3-39
27 In the List window select the signal you want to change, then make the property
changes in the dialog box. Make the following property changes:
• Select signal a, then click Decimal, then click Apply.
• Select signal b, then click Decimal, then Apply.
• Select signal sum, then click Decimal, then OK.
This brings you to the end of this lesson, but feel free to experiment further with
the menu system. When you are ready to end the simulation session, quit VSIM
without saving data by entering the following command at the VSIM prompt:
quit -force