Technical data

vsim
ModelSim EE/PLUS Reference Manual ModelSim Command Reference
-
93
The options may also be specified with the License variable (p420) in the
modelsim.ini
file; see the "[vsim] section" (p419)
-multisource_delay min | max | latest
Controls the handling of multiple PORT or INTERCONNECT constructs that terminate at
the same port. Optional. By default, the Module Input Port Delay (MIPD) is set to the
latest
value encountered in the SDF file. Alternatively, you may choose the
min
or
max
of the
values.
-nocompress
Causes VSIM to create uncompressed checkpoint files. Optional. This option must be used
with the -restore option (below) to restore a simulation from an uncompressed checkpoint
file.
+no_notifier
Disables notifier toggling for timing constraint violations. Optional.
+no_tchk_msg
Disables timing constraint error messages. Optional.
+notimingchecks
Disables Verilog and VITAL timing checks for faster simulation. Optional. By default,
Verilog timing check system tasks ($setup, $hold,...) in specify blocks are enabled. For
VITAL, the timing check default is controlled by the ASIC or FPGA vendor, but most
default to enabled.
-quiet
Disable 'loading' messages. Optional.
<license_option> Description
-lic_nomgc excludes any MGC licenses from the search
-lic_nomti excludes any MTI licenses from the search
-lic_vlog searches only for Model
Sim
EE/VLOG licenses
-lic_vhdl searches only for Model
Sim
EE/VHDL licenses
-lic_plus searches only for Model
Sim
EE/PLUS licenses
-lic_noqueue do not wait in queue when license is unavailable