Technical data

Verilog SDF
444
-
Standard Delay Format (SDF) Timing Annotation ModelSim EE/PLUS Reference Manual
RECOVERY
is matched to $recovery:
REMOVAL
is matched to $removal:
SKEW
is matched to $skew:
WIDTH
is matched to $width:
PERIOD
is matched to $period:
NOCHANGE
is matched to $nochange:
SDF Verilo
g
(RECOVERY (negedge reset) (posedge clk) (5)) $recovery(negedge reset, posedge clk, 0);
SDF Verilo
g
(REMOVAL (negedge reset) (posedge clk) (5)) $removal(negedge reset, posedge clk, 0);
SDF Verilo
g
(SKEW (posedge clk1) (posedge clk2) (5)) $skew(posedge clk1, posedge clk2, 0);
SDF Verilo
g
(WIDTH (posedge clk) (5)) $width(posedge clk, 0);
SDF Verilo
g
(PERIOD (posedge clk) (5)) $period(posedge clk, 0);
SDF Verilo
g
(NOCHANGE (negedge write) addr (5) (5)) $nochange(negedge write, addr, 0, 0);