Technical data

ModelSim EE/PLUS Reference Manual Introduction -
26
6 - ModelSim EE Graphic Interface (p103)
This chapter describes the graphic interface available while operating VSIM, the Model
Sim
simulator. Model
Sim
’s graphic interface is designed to provide consistency throughout all
operating system environments.
7 - Simulator Command Reference (p245)
The simulator commands used to control the VSIM simulator are described in this chapter.
These commands are only valid after loading a design with the
vsim
command (p91) or the
via the Model
Sim
graphical interface.
8 - System Initialization/Project File (p413)
This chapter covers the functions provided by
modelsim.ini,
the system initialization file,
or project file.
9 - The TextIO Package (p425)
This chapter covers the use of the TextIO package with Model
Sim
. The TextIO package
allows human-readable text input from a declared source within a VHDL file during
simulation.
10 - ModelSim and VITAL (p431)
This chapter covers Model
Sim
’s implementation of the VITAL (VHDL Initiative Towards
ASIC Libraries) specification for ASIC modeling.
11 - Standard Delay Format (SDF) Timing Annotation (p435)
This chapter discusses Model
Sim
’s implementation of SDF (Standard Delay Format)
timing annotation. Included are sections on VITAL SDF and Verilog SDF, plus
troubleshooting.
12 - VHDL Foreign Language Interface and Verilog PLI (p451)
This chapter covers ModelSim’s VHDL FLI (Foreign Language Interface) and its
implementation of the Verilog PLI.
13 - Value Change Dump (VCD) Files (p491)
This chapter explains Model Technology’s Verilog VCD implementation for Model
Sim
.
The VCD usage is extended to include VHDL designs.
14 - Logic Modeling Library and Hardware Modeler (p501)
This chapter describes the use of the SmartModel Library, SmartModel Windows, and the
Logic Modeling Hardware Modeler with Model
Sim
.
15 - Using Tcl (p513)
This chapter provides an overview of Tcl (tool command language) as used with Model
Sim
.