Technical data

Tcl variables

254

Simulator Command Reference ModelSim EE/PLUS Reference Manual

IgnoreFailure 0,1 if 1, ignore assertion failures

IgnoreNote 0,1 if 1, ignore assertion notes

IgnoreWarning 0,1 if 1, ignore assertion warnings

IterationLimit positive integer limit on simulation kernel iterations during one time

delta, default is 5000

ListDefaultIsTrigger 0,1 if 1, the default is for signals to trigger the list

display, default is 1

ListDefaultShortName 0,1 1 corresponds to Short Name, and 0 to Full Name,

default is 1

NumericStdNoWarnings 0,1 if 1, warnings generated within the accelerated

numeric_std and numeric_bit packages are

suppressed, default is 0

PathSeparator any single

character

used for hierarchical path names, default in

modelsim.ini

is "/"

PlotFilterResolution 0.1 + specifies the output resolution for the waveform

postscript file; default is 0.2, which equals 600dpi

resolution; 0.1 equals 1200dpi; 0.4 equals 300dpi,

etc.; see "Changing the output resolution" (p189)

RunLength positive integer default simulation length in units specified by the

UserTimeUnit variable, default is 100

SourceDir any valid path a list of alternate directories to search for source

files; separate multiple paths with a colon

SourceMap any valid path a Tcl associative array for mapping a particular

source file path (index) to another source file path

(value)

StdArithNoWarnings 0,1 if 1, warnings generated within the accelerated

Synopsys std_arith packages are suppressed

Variable name Value ran

ePurpose