Technical data

ModelSim EE/PLUS Reference Manual Introduction-
23
1 -
Introduction
Chapter contents
Software versions . . . . . . . . . . . . . . . . . . .23
ModelSim’s graphic interface . . . . . . . . . . . . . . . .24
Standards supported . . . . . . . . . . . . . . . . . . .24
Assumptions. . . . . . . . . . . . . . . . . . . . .25
Sections in this document . . . . . . . . . . . . . . . . .25
Simulation action list . . . . . . . . . . . . . . . . . .27
HDL and HDL item defined. . . . . . . . . . . . . . . . .29
Where to find our documentation . . . . . . . . . . . . . . .30
Model Technology’s Model
Sim
EE/PLUS simulation system provides a full
VHDL, Verilog and mixed-HDL simulation environment for UNIX, Microsoft
Windows NT 4.0, and Windows 95/98. Model
Sim
EE/PLUS’s single-kernel
simulator allows you to efficiently simulate mixed VHDL and Verilog designs
within one consistent interface.
Software versions
This documentation was written to support Model
Sim
EE/PLUS 5.2 for UNIX,
Microsoft Windows NT 4.0, and Windows 95/98. If the Model
Sim
software you
are using is a later release, check the README file that accompanied the
software. Any supplemental information will be there.
Although this document covers both VHDL and Verilog simulation, you will find
it a useful reference even if your design work is limited to a single HDL.