Technical data

Setting default compile options
192
-
ModelSim EE Graphic Interface ModelSim EE/PLUS Reference Manual
Locating source errors during compilation
If a compiler error occurs during compilation, a red error message is printed in
the Main transcript. Double-click on the error message to open the source file in
an editable Source window with the error hilighted.
Setting default compile options
Use the
Options > Compile
menu selection to bring up the
Compile Options
dialog box shown below.
OK
accepts the changes made and closes the dialog box.
Apply
makes the changes with the dialog box open so you can test your settings.
Cancel
closes the dialog box and makes no changes. The options found on each
page of the dialog box are detailed below.
Note:
Changes made in the
Compile Options
dialog box are the default for the current simulation only.
Options can be saved as the default for future simulations by editing the simulator control variables in the
modelsim.ini
file; the variables to edit are noted in the text below. You can use the
notepad
(p335) to edit the
variables in
modelsim.ini
if you wish. See also, "System Initialization/Project File" (p413) for more
information.
double-click on the error in the Main window
and the error is hilighted and ready
to edit in the Source window