Technical data

List window
42
-
ModelSim EE Graphic Interface ModelSim EE Tutorial
Settin
g
List window display properties
Before you add items to the List window you can set the window’s display
properties. To change when and how a signal is displayed in the List window,
make this selection from the List window menu bar:
Prop > Display Props
. The
resulting Modify Display Properties dialog box has the following options.
Trigger settings page
The Triggers page controls the triggering for
the display of new lines in the List window.
You can specify whether an HDL item trigger
or a strobe trigger is used to determine when
the List window displays a new line. If you
choose
Trigger on: Signals
, then you can
choose between collapsed or expanded delta
displays. You can also choose a combination
of signal or strobe triggers. To use gating,
Signals or Strobe or both must be selected.
The Triggers page includes these options:
•
Deltas:Expand Deltas
When selected with the
Trigger on: Signals
check box, displays a new line for each time step
on which items change, including deltas within a
single unit of time resolution.
•
Deltas:Collapse Deltas
Displays only the final value for each time unit in the List window.
•
Deltas:No Deltas
No simulation cycle (delta) column is displayed in the List window.
•
Trigger On: Signals
Triggers on signal changes. Defaults to all signals. Individual signals may be
excluded from triggering by using the
Prop > Signals Props
dialog box.
•
Trigger On: Strobe
Triggers on the
Strobe Period
you specify; specify the first strobe with
First
Strobe at:
.
•
Trigger Gating: Expression
Enables triggers to be gated on and off by an overriding expression, much like
a hardware signal analyzer might be set up to start recording data on a specified