Technical data

vcom
CR-170 ModelSim Commands ModelSim EE/SE Command Reference
-f <filename>
Specifies a file with more command line arguments. Allows complex arguments
to be reused without retyping. Optional.
-just eapbc
Directs the compiler to just include:
e - entities
a - architectures
p - packages
b - bodies
c - configurations
Any combination in any order can be used, but one choice is required if you use
this optional switch.
-skip eapbc
Directs the compiler to skip all:
e - entities
a - architectures
p - packages
b - bodies
c - configurations
Any combination in any order can be used, but one choice is required if you use
this optional switch.
-line <number>
Starts the compiler on the specified line in the VHDL source file. Optional; by
default, the compiler starts at the beginning of the file.
-no1164
Causes the source files to be compiled without taking advantage of the built-in
version of the IEEE std_logic_1164 package. Optional. This will typically result
in longer simulation times for VHDL programs that use variables and signals of
type std_logic.
-noaccel <package_name>
Turns off acceleration of the specified package in the source code using that
package.
-nocheck
Disables run time range checking. In some designs, this could result in a 2X speed
increase. Optional.