Technical data

transcribe
ModelSim EE/SE Command Reference ModelSim Commands CR-157
transcribe
The transcribe command displays a command in the Main window, then executes
the command. Transcribe directs commands to the Main window transcript from
an external event such as a menu pick or button selection, it may not be used from
the command line or a macro. The add button
(CR-20) and add_menuitem (CR-
30)
commands can utilize transcribe. Returns nothing.
Syntax
transcribe
<command>
Arguments
<command>
Specifies the command to execute. Required.
Examples
add button pwd {transcribe pwd} NoDisable
Creates a button labeled "pwd" that invokes transcribe with the pwd Tcl command, and
echoes the command and its results to the Main window. The button remains active during
a run.
See also
add button command
(CR-20), and add_menu command (CR-26)