Technical data

property wave
CR-124 ModelSim Commands ModelSim EE/SE Command Reference
property wave
The property wave command changes one or more properties of the specified
signal, net or register in the Wave window
(10-212). The properties correspond to
those than can be specified using the Wave window Prop > Display Props menu
selection. At least one argument must be used.
Syntax
property wave
[-window <wname>] [-color <color>] [-format <format>] [-height
<number>] [-offset <number>] [-radix <radix>] [-scale <float>]
<pattern>
Arguments
-window <wname>
Used to specify a particular Wave window when multiple instances of the window
exist (i.e., wave2). Optional. If no window is specified the default window is used;
the default window is determined by the most recent invocation of the view
command (CR-180).
-color <color>
Specifies any valid system color name. Optional.
-format <format>
The waveform <format> can be expressed as:
analog
Displays a waveform whose height and position is determined by the -scale and
-offset values (shown below). Optional.
literal
Displays the waveform as a box containing the item value (if the value fits the
space available). Optional.
logic
Displays values as 0, 1, X, or Z. Optional.
-height <number>
Specifies the height (in pixels) of the waveform. Optional.
-offset <number>
Specifies the waveform position offset in pixels. Valid only when -format is
specified as analog. Optional.