Technical data

Command reference table
CR-12 ModelSim Commands ModelSim EE/SE Command Reference
disable_menu
(CR-65) disables the specified menu within the specified window
disable_menuitem
(CR-66) disables a specified menu item within the specified menu_path of
the specified window
disablebp
(CR-64) temporarily turns off all existing breakpoints
do
(CR-67) executes commands contained in a macro file
down | up
(CR-70) searches for signal transitions or values in the specified List window
drivers
(CR-73) displays in the Main window the current value and scheduled future
values for all the drivers of a specified VHDL signal or Verilog net
dumplog64
(CR-74) dumps the contents of the vsim.wav file in a readable format
echo
(CR-75) displays a specified message in the Main window
edit
(CR-76) invokes the editor specified by the EDITOR environment variable
enable_menu
(CR-78) enables a previously-disabled menu
enable_menuitem
(CR-79) enables a previously-disabled menu item
enablebp
(CR-77) turns on all breakpoints turned off by the disablebp command (CR-
64)
environment (CR-80) display or change the current region/signal environmen
examine
(CR-81) examines one or more HDL items, and displays current values (or
the values at a specified previous time) in the Main window
exit
(CR-84) exits the simulator and the ModelSim application
find (CR-85) displays the full pathnames of all HDL items in the design whose
names match the name specification you provide
force
(CR-87) allows you to apply stimulus to VHDL signals and Verilog nets
interactively
getactivecursortime
(CR-90) gets the time of the active cursor in the Wave window
getactivemarkertime (CR-91) gets the time of the active marker in the List window
lecho
(CR-92) takes one or more Tcl lists as arguments and pretty-prints them to
the Transcript window
Command name Action