Technical data

Basic VHDL simulation
Getting Started with ModelSim PE Tutorial: Using ModelSim PE
-
85
Notice that no matter which Model
Sim
window is active, anything you type is automatically
entered on the Transcript window command line.
The commands you typed made signals appear in the List and Wave windows. If you desired
to, you could list or view only specified signals by entering the signal names after the command
instead of the asterisk. (When you do that, separate the names with spaces.)
Step 12.
An alternative would be to use the menu bar. If you use the Signals menu, you will see several
options.
Step 13.
Before we go on, let’s customize the window positions and sizes. Select
Window > Tile
Vertically
. Make the Transcript, Source, and Structure windows about equal size across the top
tier. Then put the Process, Signals, Dataflow, and Variables windows in the second row. Now
if you make the List and Wave windows twice as big, you will be using the entire screen again
- probably something like the illustration.