Technical data

Wave window
Getting Started with ModelSim PE ModelSim PE Graphic Interface
-
69
• octal
• decimal
• hexadecimal.
See
vector
in the illustration for an example of symbolic.
Logic Formatting
Choose
Logic
to format a HDL item display in logic representation (1, 0, X, etc.).
Zooming the Wave window
You can change the amount of time shown in the waveform display windowpane of the Wave
window with the mouse or with menu commands.
Zoom in on an area of the display by holding down the
<right mouse button>
and dragging
through the area of the display you want expanded.
You can also use these
Zoom
menu bar commands:
•
Full
Redraws the display to show the entire simulation from time 0 to the current simulation
time.
•
In 2X
Zooms in by a factor of two, increasing the resolution and decreasing the visible range
horizontally, cropping the view on the right. The starting time is held static.
•
Out 2X
Zooms out by a factor of two, decreasing the resolution and increasing the visible range
horizontally, extending the view on the right. The starting time is held static.
•
Last
Restores the display to where it was before the last zoom command.
•
Range
Brings up a pop-up menu that allows you to enter the beginning and ending times for a
range of time units to be displayed.