Technical data

Signals window
Getting Started with ModelSim PE ModelSim PE Graphic Interface
-
51
Freeze
is the default for Verilog nets and unresolved VHDL signals and
Drive
is the default
for resolved signals.
If you prefer
Freeze
as the default for resolved and unresolved signals, you can change the
default force kind in the
modelsim.ini
file.
Adding HDL items to other windows
From the menu bar you can use the
Signals > Add to Waveform | List | Logfile
commands to
instruct Model
Sim
to add VHDL signals or Verilog nets to the List or Wave windows or to the
log file (an archive file in binary format). There are menu commands for each feature.
There are four choices for signal selection:
•
Selected Signal
Lists/logs/displays only the signal or net selected in the Signals window.
•
Signals in Region
Lists/logs/displays all signals and nets in the HDL item selected as the current region in
the Structure window.
•
Signals in Design
Lists/logs/displays all signals or nets in the design.
•
Signals from Dataflow
Lists/logs/displays only the signal or net selected in the Dataflow window.