Technical data

List window
Getting Started with ModelSim PE ModelSim PE Graphic Interface
-
43
•
Radix
Change the radix for the selected signal; overrides the radix default set in the List Defaults
dialog box.
•
Width
The specification you enter in this text box determines the number of spaces the item’s
column occupies in the listing.
•
Trigger
Specify whether or not a change in the value of the selected item is to trigger a new line
in the listing ; overrides the Trigger default set in the List Defaults dialog box.
Editing a list
Once you have the HDL items you want in the list, you can order them in the listing. To
determine which items appear first, second, third, etc. in your listing, use the List window menu
bar
Edit
commands:
• Cut
• Copy
• Paste > Before | After | At Beginning | At End
• Delete All
Saving a listing
Use the List window’s menu bar command
File > Save Listing
to save your simulation results
as an ASCII file named
<filename>.lst
.
Be aware that this file could be very large!
Saving a List window configuration
Once you’ve constructed a list format that you like and you plan to use it again, or if you plan
to compare two lists, it’s best to make sure your format is always the same. You can do that by
saving your list configuration with the List window’s menu bar command:
File > Save
Configuration
.