Technical data

Updates
132
-
Help, Updates, and Licensing Getting Started with ModelSim PE
•
Lucent Technologies
Bell Labs Design Automation
email: [e-mail]
telephone: [phone]
web site: http://www.bell-labs.com/org/blda
•
Synplicity
email: [e-mail]
telephone: [phone]
web site: http://www.synplicity.com
Updates
Getting the latest version information
If you want the latest version information via email from Model Technology, make sure your
email address is current in our customer database. If you think it is not, send email to
license@m
odel.com. Make the subject line read "register email address". Put your hostID or
hardware security key number and your email address in the body of the message.
Getting the latest version
You can ftp the latest version of the software from the web site at ftp.model.com. Instructions
are there as well. A valid license file from either Model Technology or Mentor Graphics is
needed to uncompress the Model
Sim
EE files. A password from Model Technology is needed
to uncompress the Model
Sim
PE files. Contact [e-mail] if you are a current PE
customer and need a password.
Model
Sim
PE Licensing
Starting with 4.6, Model
Sim
PE products use a programmable hardware security key. The "key
code" for these devices consists of 20 hexadecimal digits, for example:
1234-5678-90ab-cdef-1234.
Embedded in the key code is: the serial number of the key (it is also printed on the third line on
the back of the key); the product purchased (VHDL, VLOG, or PLUS); the maintenance