Technical data

Getting Started with ModelSim PE Introduction - 11
1 -
Introduction
Chapter contents
Software versions . . . . . . . . . . . . . . . . .11
Standards supported . . . . . . . . . . . . . . . . . 12
Assumptions . . . . . . . . . . . . . . . . . . .13
Sections in this guide . . . . . . . . . . . . . . . . 13
HDL and HDL item defined. . . . . . . . . . . . . . . 14
Where to find our documentation . . . . . . . . . . . . . 15
The purpose of this guide is to help you install and become familiar with Model
Sim
PE, Model
Technology’s HDL-simulation software for PCs. Tutorials are included that apply to one or
more of the following Model
Sim
simulators:
•
ModelSim PE/PLUS
VHDL, Verilog, and mixed VDHL/Verilog simulation for PCs
•
ModelSim PE/VHDL
VHDL simulation for PCs
•
ModelSim PE/VLOG
Verilog simulation for PCs
Software versions
This documentation was written to support Model
Sim
PE 4.7 for PCs. If the software you are
using is a later release, check the README file on the CD-ROM that accompanied the
software. Any supplemental information will be there.
Although this guide covers both VHDL and Verilog simulation, you will find it a useful
reference even if your design work is limited to a single HDL.