User`s manual

www.modecom.eu

Wireless router

Mode: If you choose ‘Allow Listed’, only those clients whose wireless MAC

addresses are in the access control list will be able to connect to your Ac-

cess Point. When ‘Deny Listed’ is selected, these wireless clients on the

list will not be able to connect the Access Point. The MAC Address format

is 001122334455.

4.1.3 Wireless Distribution System (WDS)

WDS uses wireless media to communicate with other APs, like the Ethernet

does. To do this, rstly you must set AP Mode to WDS or AP+WDS in basic

setting, then enable WDS function and set another AP MAC which you want

to communicate with. The WDS supports WEP and WPA security mode. Of

course in order to make APs work, you have to keep them working on the

same channel and security mode as source AP.