User`s manual

www.modecom.eu
108
802.11n WLAN ADSL2+ Router
Fieldsontherst
setting block
Description
Enabled/Disabled Radio buttons to enable/disable the interface group feature.
If disabled, all interfaces belong to the default group.
Interface groups To manipulate a mapping group:
1.Select a group from the table.
2.Select interfaces from the available/grouped interface list
and add it to the grouped/available interface list using the
arrow buttons to manipulate the required mapping of the
ports.
3.Click “Apply Changes” button to save the changes.
Function
buttons
Description
Apply
Changes
Save SNMP conguration. New conguration will take effect after saving into
ash memory and rebooting the system. See section “Admin” for details.