User`s manual
www.modecom.eu
56
WLAN Router
Operations of AP - AP being an enrollee
In this case, AP will be congured by any registrar either through in-band EAP or UPnP. Here, users do not need to
do any action on AP side. They just need AP’s device PIN and enter it into registrar. An example from Vista WCN will
be given.
From the left-hand Wireless -> WPS menu. The following page is displayed:
Make sure AP is in un-congured state.
Plug the Ethernet cable into AP’s LAN port and make sure the IP connection is valid with Vista.
Make sure WCN is enabled. Users may need to enable it at the rst time. They could open the “Control Panel”,
click “Classic View“, open “Administrative Tools”, double click “Services”, ”, a User Account Control pop up and click
“Continue“, edit properties of “Windows Connect Now”, choose the “Startup type” with “Automatic” and click “Start”.
If the previous steps are done, open Windows Explorer. Go to the Network section.
Click on “Network discovery and le sharing are turned o. Network computers and devices are not visible. Click to
Change…“