User`s manual

39
WLAN Router
Field
Description
Encryption
Congure the Encryption to None, WEP, WPA , WPA2 or WPA Mixed
Set WEP Key
Congure the WEP Key
Use 802.1x Authentication
Use 802.1x Authentication by WEP 64bits or WEP 128bits
WPA Authentication Mode
Congure the WPA Authentication Mode to Enterprise (RADIUS) or Personal (Pre-
Shared Key)
WPA Cipher Suite
Congure the WPA Cipher Suite to TKIP and/or AES
WPA2 Cipher Suite
Congure the WPA2 Cipher Suite to TKIP and/or AES
Pre-Shared Key Format
Congure the Pre-Shared Key Format to Passphrase or HEX (64 characters)
Field
Description
Pre-Shared Key
Type the Pre-Shared Key
Enable Pre-Authentication
According to some of the preferred embodiments, a method for proactively esta-
blishing a security association between a mobile node in a visiting network and an
authentication agent in another network to which the mobile node can move inclu-
des: negotiating pre-authentication using a ag in a message header that indicates
whether the communication is for establishing a pre-authentication security asso-
ciation; and one of the mobile node and the authentication agent initiating pre-au-
thentication by transmitting a message with the ag set in its message header, and
the other of the mobile node and the authentication agent responding with the
ag set in its message header only if it supports the pre-authentication. Enable/di-
sable pre-authentication support. Default: disable.
Authentication RADIUS
Server
Port: Type the port number of RADIUS Server
IP address: Type the IP address of RADIUS Server
Password: Type the Password of RADIUS Server
WEP + Encryption Key
WEP aims to provide security by encrypting data over radio waves so that it is protected as it is transmitted from one
end point to another. However, it has been found that WEP is not as secure as once believed.
From the Encryption drop-down list, select WEP setting.