User`s manual

www.modecom.eu
38
WLAN Router
Field
Description
Authentication Type
Congure the Authentication Type to Open System, Shared Key or Auto
Fragment Threshold
When transmitting a packet over a network medium, sometimes the packet is bro-
ken into several segments, if the size of packet exceeds that allowed by the ne-
twork medium.
The Fragmentation Threshold denes the number of bytes used for the fragmenta-
tion boundary for directed messages.
RTS Threshold
RTS stands for “Request to Send”. This parameter controls what size data packet the
low level RF protocol issues to an RTS packet. The default is 2347.
Beacon Interval
Choosing beacon period for improved response time for wireless http clients.
Data Rate
Select the Data Rate from the drop-down list
Preamble Type
Specify the Preamble type is short preamble or long preamble
Broadcast SSID
Broadcast or Hide SSID to your Network.
Default: Enabled
IAPP
Disable or Enable IAPP
802.11g Protection
A protection mechanism prevents collisions among 802.11g nodes.
WMM
Enable/disable the Wi-Fi Multimedia (WMM) support.
RF Output Power
TX Power measurement.
Turbo Mode
Congure the Turbo Mode to Auto, Always or O
Note: „Always” may have compatibility issue. „Auto” will only work with Realtek pro-
duct.
Security
This page allows you setup the wireless security. Turn on WEP or WPA by using Encryption Keys could prevent any
unauthorized access to your wireless network. To access the Wireless Network Security page:
From the left-hand Wireless menu, click on Security. The following page is displayed: