User`s manual
www.modecom.eu
30
WLAN Router
If you want to use WEP 64bit Hex (10 characters) data encryption, follow the instructions in Conguring WEP •
64bit Hex (10 characters) security.
If you want to use WEP 128bit ASCII (5 characters) data encryption, follow the instructions in Conguring WEP •
128bit ASCII (5 characters) security.
If you want to use WEP 128bit Hex (10 characters) data encryption, follow the instructions in Conguring WEP •
128bit Hex (10 characters) security.
If you want to use WPA1 - Wi-Fi Protected Access 1 (TKIP) Passphrase encryption, follow the instructions in •
Conguring WPA (TKIP) Passphrase security.
If you want to use WPA1 - Wi-Fi Protected Access 1 (TKIP) HEX (64 characters) encryption, follow the instruc-•
tions in Conguring WPA (TKIP) HEX (64 characters) security.
If you want to use WPA2 (AES) - Wi-Fi Protected Access 2 (AES) Passphrase encryption, follow the instructions •
in Conguring WPA2 (AES) Passphrase security.
If you want to use WPA2 (AES) - Wi-Fi Protected Access 2 (AES) HEX (64 characters) encryption, follow the in-•
structions in Conguring WPA2 (AES) HEX (64 characters) security.
If you want to use WPA2 Mixed- Wi-Fi Protected Access 2 (Mixed) Passphrase encryption, follow the instruc-•
tions in Conguring WPA2 (Mixed) Passphrase security.
If you want to use WPA2 Mixed- Wi-Fi Protected Access 2 (Mixed) HEX (64 characters) encryption, follow the •
instructions in Conguring WPA2 (Mixed) HEX (64 characters) security.
Conguring WEP 64bit ASCII (5 characters) security
The example set in this section is for 64bit encryption.
From the Encryption drop-down list, select WEP setting.
From the Key Length drop-down list, select 64-bit setting.
From the Key Format drop-down list, select ASCII (5 characters) setting.
From the Default Tx Key drop-down list, select Key 1, Key 2, Key 3 or Key 4 setting.
Type the Default Tx Key to Key 1, Key 2, Key 3, or Key 4. The Default Tx Key is realated to Encryption Key 1, Encryption
Key 2, Encryption Key 3 and Encryption Key 4.
Click Finished.