User`s manual

25
WLAN Router
Static IP
In this mode, the device is supposed to connect to internet via ADSL/Cable Modem. The NAT is enabled and PCs
in four LAN ports share the same IP to ISP through WAN port. The connection type can be setup in WAN page by
using static IP.
From the WAN Access Type drop-down list, select Static IP setting determined by your Network Administrator or
ISP.
Enter IP Address for example 192.168.1.10.
Enter Subnet Mask for example 255.255.255.0.
Enter Default Gateway for example 192.168.1.1.
Enter DNS for example 168.95.1.1.
Click Next>>.
DHCP Client
In this mode, the device is supposed to connect to internet via ADSL/Cable Modem. The NAT is enabled and PCs
in four LAN ports share the same IP to ISP through WAN port. The connection type can be setup in WAN page by
using static IP.
From the WAN Access Type drop-down list, select DHCP Client setting determined by your Network Administrator
or ISP.
Click Next>>.