User`s manual

15
WLAN Router
Label Function
WLAN Press this button for 5 seconds to Disable or Enable Wireless LAN.
WPS Press this button for 3 seconds to Enable WPS function.
Connecting your device
This chapter provides basic instructions for connecting the Wireless Gateway to a computer or LAN and to the
Internet.
In addition to conguring the device, you need to congure the Internet properties of your computer(s). For more
details, see the following sections:
Conguring Ethernet PCs
This chapter assumes that you have already established a DSL/Cable service with your Internet service provider
(ISP). These instructions provide a basic conguration that should be compatible with your home or small oce ne-
twork setup. Refer to the subsequent chapters for additional conguration instructions.
Connecting the Hardware
This section describes how to connect the device to the wall phone port, the power outlet and your computer(s)
or network.
WARNING
Before you begin, turn the power o for all devices. These include your computer(s), your LAN hub/switch (if
applicable), and the Wireless Gateway.
The diagram below illustrates the hardware connections. The layout of the ports on your device may vary from the
layout shown. Refer to the steps that follow for specic instructions.
Overview of Hardware Connections