User`s manual

www.modecom.eu
114
WLAN Router
If you are using Windows XP SP1, select:
•“InternetGatewayDevicediscoveryandControlClient”.
•“UniversalPlugandPlay”.
If you are using Windows XP SP2, select:
•“InternetGatewayDevicediscoveryandControlClient”.
•“UPnPUserInterface”.
6. Reboot your system.
Once you have installed the UPnP software and you have rebooted (and your network includes the IGD system), you
should be able to see the IGD controlled device on your network.
For example, from the Network Connections window you should see the Internet Gateway Device:
Troubleshooting
This appendix suggests solutions for problems you may encounter in installing or using the Wireless Gateway, and
provides instructions for using several IP utilities to diagnose problems.
Contact Customer Support if these suggestions do not resolve the problem.
Troubleshooting Suggestions
Problem
Troubleshooting Suggestion
LEDs
Power LED does not illuminate
after product is turned on.
Verify that you are using the power cable provided with the device
and that it is securely connected to the Wireless Gateway and a wall
socket/power strip.
LINK LAN LED does not illumi-
nate after Ethernet cable is at-
tached.
Verify that the Ethernet cable is securely connected to your LAN
hub or PC and to the Wireless Gateway. Make sure the PC and/or
hub is turned on.
Verify that your cable is sucient for your network requirements. A
100 Mbit/sec network (10BaseTx) should use cables labeled CAT 5.
A 10Mbit/sec network may tolerate lower quality cables.