User`s manual

www.modecom.eu
100
WLAN Router
Firmware Update
The Firmware Update page allows you to:
check if an updated rmware version is available from [Provider].
download an updated rmware version and install it on your device.
manually download the latest rmware version from [Provider]’s website and manually update your rmware. See
Manually updating rmware.
About rmware versions
Firmware is a software program. It is stored as read-only memory on your device. [Provider] is continually improving
this rmware by adding new features to it, and these features are saved in later versions of the rmware.
Your device can check whether there are later rmware versions available. If there is a later version, you can down-
load it via the Internet and install it on your device.
Note
If there is a rmware update available you are strongly advised to install it on your device to ensure that you
take full advantage of any new feature developments.
Manually updating rmware
You can manually download the latest rmware version from [Provider]’s website to your PC’s le directory.
Once you have downloaded the latest rmware version to your PC, you can manually select and install it as fol-
lows:
From the left-hand Management menu, click on Upgrade Firmware Upgrade. The following page is displayed:
Click on the Browse… button.
(Note that if you are using certain browsers (such as Opera 7) the Browse button is labeled Choose.)
Use the Choose le box to navigate to the relevant directory where the rmware version is saved.
Once you have selected the le to be installed, click Open. The le’s directory path is displayed in the New Firmware
Image: text box.
Click Upgrade >. The device checks that the selected le contains an updated version of rmware. A status screen
pops up, please wait for a while…….
Firmware update has been update complete. The following page is displayed:
Click OK.